Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Usage and care instructions for the Backswing
Congratulations on purchasing your new Backswing
®
With the Backswing
Germany'!
As a piece of sports equipment, it is manufactured in line with the applicable EU regulations
and does not contain any banned phthalates and no heavy metals.
The Backswing Trainer is a versatile training device and represents a further development of the
proven Airgo lordosis back cushions. An even and secure connection to the base is achieved through
the additional stable plate, to which the air cushion is attached. The device can be used on the floor
while standing, kneeling, and in further positions to train balance, coordination and stability.
Furthermore, the device can be used as a base for patients on their stomach, side and back for
mobilisation. Also ideal as an unstable base for stomach and back training in all target groups. The
integrated needle valve makes it possible to adapt the inflation to suit the patient or person working out.
Fields of application: fitness, functional training, competitive sports
Warnings:
•
Over inflation causes the material to over-expand. In this case, functionality and safety can no
longer be guaranteed.
•
Avoid exposure to direct sunlight and storage close to heat sources, as the material of the
Backswing Trainer can otherwise become deformed.
•
Avoid contact with sharp and pointed objects (e.g. glass shards/sharp stones in the soles of
shoes), as these can damage the device. Do not throw device!
Brief device information:
The Backswing Trainer is made from high-quality Ruton with a needle valve.
Dimensions: approx. 46 x 29 cm
Load-bearing capacity: approx. 150 kg
Maintenance:
To clean the Backswing Trainer, you can use all mild, commercially-available cleaning agents and
disinfectants. Cleaners containing solvents, acids or corrosive substances attack the material. The
Backswing Trainer is waterproof. Pay particular attention that the underside, which gives the Backswing
Trainer its special stability, is always free from dirt and impurities, and is dry.
Inflation:
If desired, the inflation of the Backswing Trainer can be regulated with a commercially-available needle
pump (e.g. football pump). The Backswing Trainer is fitted with a needle valve for this purpose. Only
make changes to the internal pressure of the Backswing Trainer (inflation or deflation) when the
Backswing Trainer is warmed to room temperature.
Over inflation causes the material to over-expand. In this case, functionality and safety can no
longer be guaranteed. Always moisten the needle of the pump before carefully inserting it into the
needle valve.
Storage:
Please store the Backswing Trainer in a flat, horizontal position.
© TOGU GmbH
Infos auf
www.togu.de
- Service Nummer: +49 (0) 8051 9038-0
Trainer, you have chosen a TOGU
®
Trainer
®
Trainer.
branded product that is 'made in
®
Werbung
