Tecsis EGS08 Betriebsanleitung Seite 16

Betriebsanleitung/Operating manual
EGS08
Terminal X1 for 3 wire technology
Terminal Designation
1 UB
2 GND
3 Im
4 not used
5 Screen
Terminal X1 for 2 wire technology
Terminal Designation
1 UB
3 Im
4 not used
5 Screen
Terminal X2
Terminal Designation
1 24 V ac power supply or +24 V dc supply
2 24 V ac power supply or 24 V dc supply (GND)
3 not used
4 Mass
Terminal X3
Terminal Designation
1 Relay 1, main contact
2 Relay 1, centre contact
3 Relay 2, main contact
4 Relay 2, normally closed contact
5 Relay 2, centre contact
6 Relay 3, main contact
7 Relay 3, normally closed contact
8 Relay 3, centre contact
16
Remarks
Operating voltage sensor 21V dc (produced internally)
Mass
Sensor signal 1-9mA or 4-20mA
Screening of the connection wiring
Remarks
Operating voltage sensor 21V dc (produced internally)
Sensor signal 1-9mA or 4-20mA
Screening of the connection wiring
BD_BE 989 e
Controller
Controller
POT 1
POT 2
POT 3
www.tecsis.de