English
!
Procedure
26
Downloaded from
www.Manualslib.com
Warning
Danger due to lightning strikes
Installing this lightning protector between an antenna and a
SCALANCE W7xx is not adequate protection against a lightning
strike. The lightening protectors mentioned above only works within
the framework of a comprehensive lightning protection concept. If you
have questions, ask a qualified specialist company.
Remove the protective caps from the N connector of the antenna and
screw down the flexible connecting cable onto the N connector. The
tightening torque at the N connector is 1.7 Nm.
Note
Keep the protective caps
Keep protective caps taken out for later use.
manuals search engine
Compact Operating Instructions ANT792-6MN
A5E01116923B-04