Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GUEST
Assembly Instructions 09/ 2019
TOOLS REQUIRED:
Allen screw SW 4/ SW 5 (enclosed)
10 x XS bolts
10 x boxes
10 x grub screws
16 x Confirmat screws 5 x 50
video:
https://www.youtube.com/watch?v=ioIUTDqtvgE&list=PLC92853C2C2C26565&in
1
1.
Prior to assembly insert the boxes into side parts, with longitudinal slot
in the direction of the XS bolts. Insert and turn XS bolts accordingly into
head- and footparts. Do not screw the XS bolt does up to the stop.
2.
Put the head and base part on the sides and fix the screws.
2.
3.
Turn the XS bolts in the mattress supports, fit the traverse between the
bed sides and tighten the joiners.
4.
4.
Fit the mattress support with the comfirmat screws.
overhang of the mattress of 5 cm. When two GUEST beds are in use,
ensure to use the supports on the same height.
5.
Fit the rubber caps into the holes in both mattress supports.
6.
Fit the sprung slats into the rubber caps.
7.
The GUEST beds can be connected via 2 aluminum clamps. For this
purpose place the bedsides parallel and join them with the clamps from
above. For non-use please store the clamps upright at the front end of
the bed.
ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · info@zeitraum-moebel.de · www.zeitraum-moebel.de
We recommend a
Werbung
