Seite 1 Manuel d’assemblage pour système d’huisserie standard (Instructions originales) Manual de montaje para sistema de cierre estándar (Instrucciones originales) Manual de montagem para sistema de ferragem padrão (Instruções originais) Ditec PAM30STD IP2275 • 2017-04-30 www.entrematic.com www.entrematic.com Downloaded from www.Manualslib.com manuals search engine...
Seite 2 Index General safety precautions Avvertenze generali per la sicurezza Allgemeine Sicherheitshinweise Consignes générales de sécurité Advertencias generales de seguridad Advertências gerais para a segurança Operating instruction Indicazioni di utilizzo Hinweise zum Gebrauch Indications d'utilisation Instrucciones de uso Indicações de uso Entrance/Exit door frame Serramento di entrata/uscita Eingangs-/Ausgangsprofil –...
Seite 3 Vertical and horizontal section of 1 Sezione verticale e orizzontale 1 anta Vertikal- und Horizontalschnitt für Section verticale et horizontale 1 Sección vertical y horizontal de 1 hoja Secção vertical e horizontal de 1 folha moving door wing with beam with left- mobile con apertura a sinistra e trave 1 Fahrflügel mit Linksöffnung und vantail mobile avec ouverture à...
Seite 4 Vertical and horizontal section of 1 Sezione verticale e orizzontale 1 anta Vertikal- und Horizontalschnitt für Section verticale et horizontale 1 Sección vertical y horizontal de 1 hoja Secção vertical e horizontal de 1 folha moving door wing and 1 fixed door wing mobile con apertura a destra, 1 anta 1 Fahrflügel mit Rechtsöffnung, 1 vantail mobile avec ouverture à...
Seite 5 Vertical and horizontal section of 2 Sezione verticale e orizzontale 2 Vertikal- und Horizontalschnitt für 2 Section verticale et horizontale 2 Sección vertical y horizontal de 2 hojas Secção vertical e horizontal de 2 folhas moving door wings and 2 fixed door ante mobili, 2 ante fisse e sopraluce Fahrflügel, 2 Stehflügel und Oberlicht vantaux mobiles, 2 vantaux fixes et...
Seite 6: General Safety Precautions
This symbol indicates instructions or notes regarding safety, to which special attention must be paid. This symbol indicates useful information for the correct functioning of the product. 1. General safety precautions This assembly and installation manual is intended for qualified personnel only. Read the instructions carefully before installing the product.
Seite 7: Avvertenze Generali Per La Sicurezza
Questo simbolo indica istruzioni o note relative alla sicurezza a cui prestare particolare attenzione. Questo simbolo indica informazioni utili al corretto funzionamento del prodotto. 1. Avvertenze generali per la sicurezza Il presente manuale di lavorazione ed assemblaggio è rivolto esclusivamente a personale qualificato. Leggere attentamente le istruzioni prima di iniziare l’installazione del prodotto.
Seite 8: Allgemeine Sicherheitshinweise
Dieses Symbol verweist auf Anweisungen oder Hinweise zur Sicherheit, auf die besonders geachtet werden muss. Dieses Symbol verweist auf nützliche Informationen für den Betrieb des Produkts. 1. Allgemeine Sicherheitshinweise Das vorliegende Montage und Installationshandbuch ist ausschließlich für das Fachpersonal bestimmt. Lesen Sie die Anleitungen vor der Montage des Produktes aufmerksam durch.
Seite 9: Consignes Générales De Sécurité
Ce symbole indique les instructions ou les notes concernant la sécurité pour laquelle il faut être particulièrement attentif. Ce symbole indique les informations utiles pour le bon fonctionnement du produit. 1. Consignes générales de sécurité Le présent manuel d'assemblage et d'installation s'adresse uniquement à un personnel qualifié. Lire les instructions avec beaucoup d'attention avant d'installer le produit.
Seite 10: Advertencias Generales De Seguridad
Este símbolo indica instrucciones o notas relativas a la seguridad a las que prestar una atención especial. Este símbolo indica informaciones útiles para el funcionamiento correcto del producto. 1. Advertencias generales de seguridad Este manual de montaje e instalación está exclusivamente dirigido a personal cualificado. Lea detenidamente las instrucciones antes de comenzar la instalación del producto.
Seite 11: Advertências Gerais Para A Segurança
Êsse símbolo indica instruções ou notas relativas à segurança que requerem uma atenção particular. Êsse símbolo indica informações úteis para o correcto funcionamento do produto. 1. Advertências gerais para a segurança O presente manual de montagem e instalação é dirigido exclusivamente a profissionais especializados. Leia atentamente as instruções antes de iniciar a instalação do produto.
Seite 12 4. Legend Moving door wing Anta mobile Fahrﬂügel Vantail mobile Hoja móvil Portinhola móvel Fixed door wing Anta ﬁssa Seitenteil Vantail ﬁxe Hoja ﬁja Portinhola ﬁxa Beam Trave Kämpferproﬁl Montant Viga Trave Frame Cornice Rahmen Cadre Marco Caixilho Overlight Sopraluce Oberlicht Imposte Montante...
Seite 13 5. Profiles shape Scale 1:1 2089 2085 2087 2086 2088 2090 = Visible surface IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 14 5. Profiles shape Scale 1:1 2226 2091 2092 30.2 2093 2458 4073 = Visible surface IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 15 5. Profiles shape Scale 1:1 3127 3128 16.5 4480 39.5 3131 3130 = Visible surface IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 16 5. Profiles shape Scale 1:1 2094 4085 2095 167.5 4063 2096 = Visible surface IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 17 5. Profiles shape / Gaskets shape Scale 1:1 4671 51.5 113.5 = Visible surface 2098 2139 SP14 2469 2141 2140 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 18: Accessories
6. Accessories KAM30 KAF30 n° 4 Clips n° 8 TPS 4.8 x 32 n° 1 Fixing Bracket n° 2 TC 4.8 x 9.5 n° 1 Floor Guide n° 8 TPS 4.8 x 32 n° 2 Fixing Brackets n° 3 TC 4.8 x 13 KTT23 n°...
Seite 19 6. Accessories KT4063 n° 12 TC 3.5 x 9.5 n° 4 TE M6 x 20 n° 2 Nut n° 2 Washer n° 2 TE M8 x 25 n° 2 Beam Older IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 20 6. Accessories K2097L K2097L K2097L 3131 ø 15 3130 2097 L - 15 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 21 7. Glass thickness Scale 1:1 10-11 22-23 2469 2141 2140 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 22 8. Applications Scale 1:2 The PAM30 door frames allow frames to be motorised with Ditec VALOR and VALOR REX S automations. VALOR and REXS automations are not included in the configuration. The examples of vertical and horizontal sections that follow, show (for illustrative purposes only) the VALOR automations.
Seite 23 8. Applications Scale 1:2 VALOR + V4671 V4671 VAL30A3 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 24 8. Applications Scale 1:2 VALOR + V4063 V4063 VAL30A3 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 25 8. Applications Scale 1:2 REX-S REXA30 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 26 9. Vertical and horizontal section of 1 moving door wing with right-hand opening (standard version) L (min. 800, max. 1500) PL = L min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 27 10. Vertical and horizontal section of 1 moving door wing with right-hand opening T15N installed within doorway (standard version) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from...
Seite 28 11. Vertical and horizontal section of 1 moving door wing with left-hand opening (standard version) L (min. 800, max. 1500) PL = L min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 29 12. Vertical and horizontal section of 1 moving door wing with left-hand opening T17N (standard version) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 30 13. Vertical and horizontal section of 1 moving door wing with right-hand opening (french version) Valor only (not Rex-S) V4671 L (min. 800, max. 2000) PL = L min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com...
Seite 31 14. Vertical and horizontal section of 1 moving door wing with right-hand opening installed within doorway (french version) Valor only (not Rex-S) V4671 L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 Horizontal section Vertical section...
Seite 32 15. Vertical and horizontal section of 1 moving door wing with left-hand opening (french version) Valor only (not Rex-S) L (min. 800, max. 1500) PL = L min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com...
Seite 33 16. Vertical and horizontal section of 1 moving door wing with left-hand opening installed within doorway (french version) Valor only (not Rex-S) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 Horizontal section Vertical section...
Seite 34 17. Vertical and horizontal section of 1 moving door wing with beam with right-hand opening (standard version) L (min. 800, max. 1500) PL = L min. 10 LT min. = 2L + 88 40.5 30 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 35 18. Vertical and horizontal section of 1 moving door wing with beam with right-hand opening T23N installed within doorway (standard version) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 30 Horizontal section Vertical section IP2275 - 2017-04-30...
Seite 36 19. Vertical and horizontal section of 1 moving door wing with beam with left-hand opening (standard version) L (min. 800, max. 1500) PL = L min. 10 LT min. = 2L + 88 40.5 30 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 37 20. Vertical and horizontal section of 1 moving door wing with beam with left-hand opening T25N installed within doorway (standard version) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 30 Horizontal section Vertical section IP2275 - 2017-04-30...
Seite 38 21. Vertical and horizontal section of 1 moving door wing with right-hand opening and overlight (standard version) L (min. 800, max. 1500) PL = L min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 39 22. Vertical and horizontal section of 1 moving door wing with right-hand opening T27N installed within doorway and overlight (standard version) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 Horizontal section Vertical section IP2275 - 2017-04-30...
Seite 40 23. Vertical and horizontal section of 1 moving door wing with left-hand opening and overlight (standard version) L (min. 800, max. 1500) PL = L min. 10 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 41 24. Vertical and horizontal section of 1 moving door wing with left-hand opening T29N installed within doorway and overlight (standard version) L (min. 800, max. 2000) PL = L - 40 min. 10 LT min. = 2L - 2 40.5 Horizontal section Vertical section IP2275 - 2017-04-30...
Seite 42 25. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with right-hand opening (french version) Valor only (not Rex-S) L (min. 1600, max. 4000) PL = (L - 43) / 2 LT min. = L + 85 22.5 Horizontal section Vertical section...
Seite 43 26. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with right-hand opening installed within doorway (french version) Valor only (not Rex-S) L (min. 1650, max. 4000) PL = (L - 83) / 2 LT min. = L + 35 22.5 Horizontal section Vertical section...
Seite 44 27. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with left-hand opening (french version) Valor only (not Rex-S) L (min. 1600, max. 4000) PL = (L - 43) / 2 LT min. = L + 85 22.5 Horizontal section Vertical section...
Seite 45 28. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with left-hand opening installed within doorway (french version) Valor only (not Rex-S) L (min. 1650, max. 4000) PL = (L - 83) / 2 LT min. = L + 35 22.5 Horizontal section Vertical section...
Seite 46 29. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with beam with right-hand opening (standard version) L (min. 1650, max. 3000) PL = (L - 68 - X) / 2 X (min. 30) LT min. = L - 20 22.5 Horizontal section Vertical section...
Seite 47 30. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with beam with left-hand opening (standard version) L (min. 1650, max. 3000) PL = (L - 68 - X) / 2 X (min. 30) LT min. = L - 20 22.5 Horizontal section Vertical section...
Seite 48 31. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with beam with right-hand opening (french version) Valor only (not Rex-S) L (min. 1650, max. 4000) PL = (L - 68 - X) / 2 X (min.
Seite 49 32. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with beam with left-hand opening (french version) Valor only (not Rex-S) L (min. 1650, max. 4000) PL = (L - 68 - X) / 2 X (min.
Seite 50 33. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with right-hand opening and overlight (standard version) L (min. 1650, max. 3000) PL = (L - 68 - X) / 2 X (min. 30) LT min. = L - 20 22.5 Horizontal section Vertical section...
Seite 51 34. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with left-hand opening and overlight (standard version) L (min. 1650, max. 3000) PL = (L - 68 - X) / 2 X (min. 30) LT min. = L - 20 22.5 Horizontal section Vertical section...
Seite 52 35. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with right-hand opening and overlight (french version) Valor only (not Rex-S) L (min. 1650, max. 4000) PL = (L - 68 - X) / 2 X (min.
Seite 53 36. Vertical and horizontal section of 1 moving door wing and 1 fixed door wing with left-hand opening and overlight (french version) Valor only (not Rex-S) L (min. 1650, max. 4000) PL = (L - 68 - X) / 2 X (min.
Seite 54 37. Vertical and horizontal section of 2 moving door wings (standard version) L (min. 800, max. 3000) PL = L min. 10 min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 55 38. Vertical and horizontal section of 2 moving door wings (french version) Valor only (not Rex-S) L (min. 800, max. 3000) PL = L min. 10 min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 56 39. Vertical and horizontal section of 2 moving door wings with beam (standard version) L (min. 800, max. 3000) PL = L min. 10 min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 57 40. Vertical and horizontal section of 2 moving door wings with overlight (standard version) L (min. 800, max. 3000) PL = L min. 10 min. 10 LT min. = 2L + 88 40.5 Horizontal section Vertical section IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 58 41. Vertical and horizontal section of 2 moving door wings and 2 fixed door wings with beam (standard version) L (min. 1715, max. 6000) PL = (L - 68 - 2X) / 2 X (min. 30) X (min. 30) LTmax = L - 20 22.5 Horizontal section Vertical section...
Seite 59 42. Vertical and horizontal section of 2 moving door wings and 2 fixed door wings (french version) Valor only (not Rex-S) L (min. 1700, max. 6600) PL = (L - 98) / 2 LT min. = L + 70 22.5 Horizontal section Vertical section IP2275 - 2017-04-30...
Seite 60 43. Vertical and horizontal section of 2 moving door wings and 2 fixed door wings with beam (french version) Valor only (not Rex-S) L (min. 1700, max. 6600) PL = (L - 68 - 2X) / 2 X (min. 30) X (min.
Seite 61 44. Vertical and horizontal section of 2 moving door wings and 2 fixed door wings with overlight (standard version) L (min. 1715, max. 6000) PL = (L - 68 - 2X) / 2 X (min. 30) X (min. 30) LTmax = L - 20 22.5 Horizontal section Vertical section...
Seite 62 45. Vertical and horizontal section of 2 moving door wings and 2 fixed door wings with overlight (french version) Valor only (not Rex-S) L (min. 1700, max. 6600) PL = (L - 68 - 2X) / 2 X (min. 30) X (min.
Seite 63 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 64 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 65 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 66 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 67 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 68 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 69 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 70 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 71 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 72 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 73 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 74 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 75 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 76 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 77 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 78 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 79 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 80 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 81 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 82 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 83 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 84 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 85 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 86 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 87 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 88 46. Technical sections Scale 1:1 40,5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 89 46. Technical sections Out of scale 40.5 28.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 90 46. Technical sections Scale 1:1 40,5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 91 46. Technical sections Scale 1:1 40,5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 92 46. Technical sections Scale 1:2 40.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 93 46. Technical sections Scale 1:2 40.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 94 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 95 46. Technical sections Scale 1:1 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 96 46. Technical sections Out of scale 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 97 46. Technical sections Scale 1:2 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 98 46. Technical sections Scale 1:2 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 99 46. Technical sections Scale 1:2 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 100 46. Technical sections Scale 1:2 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 101 46. Technical sections Scale 1:2 22.5 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 102 46. Technical sections Scale 1:1 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 103 Moving door wing 47. Processes Anta mobile Fahrﬂügel Vantail mobile Hoja móvil Portinhola móvel 2089 2091 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 104 47. Processes Fixed door wing Anta ﬁssa Seitenteil Vantail ﬁxe Hoja ﬁja Portinhola ﬁxa IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 105 48. Details of additional dimensions VALOR IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 106 49. Instructions for assembling and installing (list of types) A1 (left) A1 (right) A2 (left) A2 (right) A3 (left) A3 (right) IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 107 49. Instructions for door assembling and installing Mobile wing Fix wing V2091 V2086 V2089 V2095 V2094 V2085 KAM30 V2090 RGR2469 KAF30 RGR2140 RGR2141 V2089 V2087 V2094 RGR2469 V2096 RGR2140 V2087 RGR2141 VSP14 VGR2098 IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 108 49. Instructions for assembling and installing (doors type A1/B1) Frame post ﬁxing Floor guide ﬁxing Wing positioning Post closing ﬁxing Simpliﬁed beam ﬁxing Automation climbing Operator ﬁxing IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 109 49. Instructions for assembling and installing (doors type A2/B2) Fixing frame installation Post closing ﬁxing Section Fix wing positioning Support beam ﬁxing End cap Automation climbing IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 110 49. Instructions for assembling and installing (doors type A3/B3) Fixing frame installation Post closing ﬁxing Section Fix wing positioning Floor guide ﬁxing Beam holder positioning Wing lateral side ﬁxing IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 111 49. Instructions for assembling and installing (doors type A3/B3) T100 Automation climbing Operator ﬁxing Beam cover Beam cover ﬁxing IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 112 49. Instructions for assembling and installing T101 Mobile wing bracket ﬁxing Carrier adjustment Belt adjustment Electrolock adjustment IP2275 - 2017-04-30 Downloaded from www.Manualslib.com manuals search engine...
Seite 113 All the rights concerning this material are the exclusive property of Entrematic Group AB. Although the contents of this publication have been drawn up with the greatest care, Entrematic Group AB cannot be held responsible in any way for any damage caused by mistakes or omissions in this publication.
Seite 114 Entrematic Group AB Lodjursgatan 10 SE-261 44, Landskrona Sweden www.entrematic.com Downloaded from www.Manualslib.com manuals search engine...

entrematic Ditec PAM30STD Montageanleitung

Quicklinks

Verwandte Anleitungen für entrematic Ditec PAM30STD

Inhaltszusammenfassung für entrematic Ditec PAM30STD

Seite 6: General Safety Precautions

Seite 7: Avvertenze Generali Per La Sicurezza

Seite 8: Allgemeine Sicherheitshinweise

Seite 9: Consignes Générales De Sécurité

Seite 10: Advertencias Generales De Seguridad

Seite 11: Advertências Gerais Para A Segurança

Seite 18: Accessories

Inhaltsverzeichnis