Controls; Lighting - AEG DVB5960HB Gebrauchsanleitung

www.aeg.com
6

4. CONTROLS

A
Button Function
A
B
C
D
E
F
G
H
I

5. LIGHTING

• For replacement contact technical support
("To purchase contact technical support").
B C D
Brief pressure: Activates/Deactivates the button pad
functions. All the buttons light up white.
If the motor is ON, it turns the motor off and leaves
the button pad functions active.
If the motor is OFF, the button pad remains active
for 1 minute.
Pressed for 3 Seconds: Activates/Deactivates the
button pad lock. For example to allow cleaning of
the Glass without activating any functions.
Activates speed one.
Activates speed two.
Activates speed three.
Activates Intensive 1 speed for 5 minutes. At the
end of this time the system will automatically return
to the speed set before. It is disabled by changing
speed or pressing button A.
Press and hold for approximately 3 seconds to En-
able / Disable the Activated Charcoal Filter alarm.
Activates BREEZE speed for 60 minutes. At the end
of this time the motor switches off. It is disabled by
changing speed or pressing button A.
Filter alarm button.
This button is normal off. It is only displayed when
by pressing and holding this button for approximately
3 seconds.
H2H indicator button.
This button is normally off. It is only displayed when
the hob is connected to the Hood.
Turns the lighting system on and off at maximum
intensity.
E F G H
Display
-
Inactive: Buttons remain lit for 1 minute.
The button turns from white to red.
The button turns from white to red.
The button turns from white to red.
The button turns from white to red.
H
The button turns from white to red.
Button H
gered after the Hood has been in operation
for 40 working hours.
Button H
alarm is triggered after the Hood has been
in operation for 160 working hours.
The button turns red.
-
I
-