Noise/Vibration Information - Bosch Indego 350 Originalbetriebsanleitung

Downloaded from www.Manualslib.com
OBJ_BUCH-3008-002.book Page 26 Friday, December 2, 2016 12:09 PM
26 | English

Noise/Vibration Information

Sound emission values determined according to
EN 50636-2-107.
Typically the A-weighted noise levels of the product are:
Sound power level 61 dB(A). Uncertainty K =2 dB.
Explanation of Installation Guide
(see pages 3–7)
Action Figure
Delivery scope/unpacking product 1
Extend perimeter wire 2
Lay perimeter wire around new inner
object 3
Lift up and carry the machine 4
Set height of cut 5
Cleaning A
Maintenance B
Installation
For a video guide on how to install the Indego please visit
www.bosch-indego.com or use the following QR-Code. Alter-
natively follow the installation guide delivered with the prod-
uct.
Note: The docking station must be positioned on the wire at
an outer edge of the cutting area. It cannot be positioned by
the side of a shed or workshop that appears as an island with-
in the cutting area.
Note: The maximum distance between perimeter wire and In-
dego at any point within the mowing area must not exceed 16
m.
Objects on the lawn below 5 cm height e.g. ponds, flower
beds etc. must be delimited in a clockwise direction around
the object.
Note: If extra perimeter wire is required this can be added us-
ing a wire connector. (see figure 2–3)
The wire can be extended up to a total maximum allowed
length of 250 m.
The perimeter wire can be buried up to 5 cm under the ground
if verticutting or raking is intended, avoid the perimeter wire
area.
When laying out the wire avoid angles of less than 45 °. This
can affect performance.
F 016 L81 221 | (2.12.16)
manuals search engine
Screen
Page
4
5
5
Symbol Meaning
6
Back button
6
7
Confirm button
7
Red LED on: mower error
Green LED on: mower is on
Green LED off: Product is inactive and it
will require your four digit PIN code to ac-
tivate the mower. Or the product is isolat-
ed, and it will require the isolator switch to
be turned on and your four digit PIN code
to activate the mower.
Left, right button
Down, up button
Display with dialog screen
Mowing
 Do not let children ride the machine.
 Press stop button on top of the mower before lifting.
Always lift the machine at its handle. (See figure 4)
After a successful installation you can either immediately be-
gin to mow by confirming "Mow now" with the confirm button
or wait for the next scheduled cutting period, as programmed
by the Bosch AUTO Calendar Function (previous acceptance
required).
A mowing schedule can also be set up according to your
needs. Approximate runtimes to complete a full garden cov-
erage are quoted below. Please note that the runtimes will
vary depending on the lawn complexity and number of objects
within the lawn area.
2
100 m 4.5 h
2
350 m 12 h
2
400 m 14 h
For best mowing results, set up a frequent mowing schedule
for longer lasting battery and for preventing debris on the
lawn.
Bosch Power Tools