Danfoss 088U0213 Bedienungsanleitung Seite 9

Instruction CF-RF Room Thermostat with Infrared Floor Sensor
Floor surface temperature limitation
. Ensure actual floor surface temperature is
2. Press and hold the push button
3. Press the up/down selector
4. Press the push button
5. Press the up/down selector
IMPORTANT!
As heat emission from the floor may vary slightly
depending on floor covering - and thereby cause
inaccurate temperature measurement - it may be
necessary to adjust the setting of max. and min.
floor surface temperatures accordingly.
! It is important always to follow recommendations
from the floor manufacturer regarding max. floor
surface temperature.
! It is recommended always to include mixing shunt
for floor heating circuits in order to ensure optimal
flow temperature. - In addition to minimised energy
consumption, correct setting of the flow tempera-
ture will eliminate the risk of excessive heat transfer
to the floor.
VI.UH.R2.1C
8
Downloaded from www.Manualslib.com
shown in the display illustrated by
MAX is also shown in the display
maximum floor surface temperature limitation
also shown in the display
mum floor surface temperature limitation
manuals search engine
to set the
shortly, SET MIN is
to set the mini-
Produced by Danfoss Floor Heating Hydronics 03.2007
until SET