ratiotec rapidcount T 575 Bedienungsanleitung Seite 14

[EN]
Checking the versions of the device
1. Select the option "Version".
2. Press the START button to confirm.
3. The version information is displayed on the screen.
4. Use the REPORT button to go to the next page.
5. Press the MENU button to exit the menu.
Setting the automatic counting function
1.
Select the option "Auto Start".
2. Press the CUR or PRINT button to select between Auto and Manual.
3. Press the MENU button to exit the menu.
Setting the counting speed
1.
Select the option "Speed".
2. Press the CUR or PRINT button to change the counting speed.
3. Press the MENU button to exit the menu.
Speed rates:
Low: 1000 notes/minute
High: 1200 notes/minute
14