Instructions For Use; Switching Between Flex/Fine - Kobold EBB100 Gebrauchsanleitung

Fine setting
Flex setting
CAUTION
Risk of injury from moving parts!
Moving parts (such as the rotating brushes or oscillating cloth holder) could cause
injury.
• Always switch the device off before all retrofitting, cleaning and maintenance
work.
• Disconnect the accessory head from the device before performing retrofitting,
cleaning or maintenance work on the accessory head.
• Stay clear of the moving parts.
• Never reach into the rotating components.

6.3 Instructions for use

1. Only use the 'max' suction power level for extremely dirty floors
and carpets.
2. Always move the device evenly back and forth.
3. Never let the device work in one place for a longer period as this
could cause damage to the floor.
4. The rotating roller brushes can mechanically work on the fringes
of the carpet and clean in the narrow gaps. Only pull the electric
brush over the fringes backwards, away from the carpet.
5. Vacuum parallel to the edges of the carpet.

6.4 Switching between flex/fine

The 'flex' and 'fine' setting options on the underside of the Kobold
EBB100 Electric Brush can be used to adjust the device in line with
the cleaning requirements.
Note On delivery, the electric brush will be witched to the 'flex' setting to
provide protection during transportation. Read the instructions
below on how to switch your electric brush to 'fine' for everyday use.
Use your electric brush on the 'fine' setting for everyday vacuuming.
If you are vacuuming coarse dirt, it is advisable to switch the electric
brush to
the 'flex' setting.
33