Operation; Attaching The Accessory Head - Kobold EBB100 Gebrauchsanleitung

Carpet type
Carpets with long interwoven fibres (Saxony)
Hard floor type
Sealed/varnished wooden floors
(floorboards, parquet)
Oiled/waxed wooden floors
Unsealed/untreated wooden floors
Sealed cork floors
Oiled/waxed cork floors
Unsealed/untreated cork floors
Laminate
Elastic floors
(PVC, cushion vinyl, linoleum)
Stone floors (marble, granite, Jura limestone, artificial stone)
Porous/delicate natural stone
(slate, clinker tiles)
Clay floors (terracotta, clinker, brick clay tiles)
Ceramic glazed tiles and fine stoneware
Untreated tiled floors
Rough concrete flooring (washed concrete)
30
++ excellent suitability
+ very good suitability
Note Follow the detailed application instructions in the following chapters.
6

Operation

6.1 Attaching the accessory head

1. Connect the attachment socket (1) of the cordless vacuum
cleaner to the pivot on the electric brush (2)
2. Make sure you hear the attachment socket click into the pivot.
3. To remove the electric brush from the cordless vacuum cleaner,
press the button (3) located at the bottom of the suction piece.
Once it is unlocked, you can remove the electric brush from the
cordless vacuum cleaner.
Kobold EBB100
++
+
-
++
+
-
++
+
+
-
+
++
-
-
- not suitable