Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safety Information - Renkforce 1761856 Bedienungsanleitung

Springbrunnenpumpe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating instructions
Fountain pump made from plastic with
4 different spray heads, 58 W
Item no. 1761856
Intended use
The fountain pump is designed for private use, e.g. in a hobby garden. The product is
not intended for irrigation or irrigation systems in industrial, production or public sectors
(e.g. garden complexes). Four replaceable spray heads are supplied with the fountain pump
for different water features. Clean and clear fresh water is allowed as the pumped liquid. The
temperature of the pumped liquid must not exceed +35 °C.
For safety and approval purposes, do not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as a short circuit, fire or electric shock. Read
the operating instructions carefully and store them in a safe place. If you pass the product on to
a third party, please hand over these operating instructions as well.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Fountain pump
• T-socket with shut-off valve
• 4x spray head
• Operating instructions
• Extension tube
Up-to-Date Operating Instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.

Important safety information

• This appliance may only be used by children over
8 years of age and people with reduced physical,
sensory or mental capabilities if they have been given
supervision or instruction concerning the safe use of
the appliance and understand the potential hazards.
• Children must always be supervised by an adult to
ensure that they do not play with the appliance.
• Children must not clean or service the appliance
without appropriate supervision.
• The maximum discharge height is 2.7 m.
• The pumped liquid can be contaminated due to leaks
in the pump of lubricants.
• The use of the product near garden ponds, fountains,
swimming pools, fountains or similar is permitted only
if the product is operated via a ground fault circuit
interrupter (GFCI, ≤ 30 mA).
• In Austria, the product may be operated in or near
swimming pools and garden ponds only if a suitable
ÖVE-tested safety isolating transformer is connected
upstream in addition to the ground fault circuit
interrupter (GFCI ≤ 30 mA).
• Damaged mains cables may only be replaced by the
manufacturer, an authorised repair centre or a qualified
electrician.
Safety instructions
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety instructions and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• Do not leave packaging material lying around carelessly. It may become a
dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation that forms might destroy the product. Furthermore,
it can cause a lethal electric shock! Allow the product to reach room temperature
before connecting it and putting it to use. This may take several hours.
• If the product shows signs of damage, do not touch it, there is a risk of death from
an electric shock! First, switch off the mains voltage to the mains socket to which
the product is connected (switch off the respective circuit breaker or remove the
safety fuse; then switch off the respective GFCI so that the mains socket is fully
disconnected). Only then remove the product from the mains socket. Dispose of
the damaged product in an environmentally friendly manner, stop using it. Replace
it with an identical product.
• The mains socket must be located near to the device and be easily accessible.
• The product must only be powered by a standard mains socket connected to the
public grid. Before plugging in the product, check that the voltage indicated on the
product corresponds to the voltage of your electricity supplier.
• Never unplug the mains plug by pulling on the cable. Always use the grips on
the plug.
• For safety reasons, disconnect the mains plug from the mains socket during
thunderstorms.
• Do not touch the mains cable if there are any signs of damage. Power down the
respective mains socket (e.g. via the respective circuit breaker), and then carefully
unplug the mains plug from the mains socket. Never use the product if the mains
cable is damaged.
• Never insert or unplug the mains plug when your hands are wet.
• The fountain pump may never be held, carried or secured via the mains cable;
there is a risk of a fatal electrical shock!
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or subjected to mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Otherwise the
mains cable may be damaged. Damaged mains cables can cause a fatal electric
shock.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis