First Start - SOMFY TaHomaPad io Installationsanleitung

6.2.3. Detecting new end-products or end-products without a registered control point
- Follow the instructions that appear on the screen to detect
all new io-homecontrol
without a registered control point in the installation.
6.2.4. Detecting sensors
- Once the new io-homecontrol
‡ If the installation includes sensors, click on "Yes".
‡ If not, click on "No" and go directly to the &RQ¿JXULQJ WKH KRXVH section.
- Follow the instructions that appear on the screen to detect all of the Somfy io-homecontrol
in the installation (temperature, sunlight, wind sensors).
- When the TaHoma Pad io has recognised all the sensors, click on "Continue".
Copyright © 2013 Somfy SAS. All rights reserved.
Downloaded from www.Manualslib.com
® end-products or all io-homecontrol
®
end-products present in the installation have been detected:

FIRST START

1
2 3 4
detecting sensors
We will now proceed with detection of all the
sensors in the installation. Does your installation
contain sensors?
yes
DASHBOARD
manuals search engine
®
no no
stop
TaHoma Pad io
1
detecting devices - 1W
6
10
TaHoma Pad io is looking for a device or
devices in the installation that is (are) stored
in the employed control.
Please wait ...
DASHBOARD stop
® sensors
FIRST START
1
2 3 4
detecting
sensors
The step entailing detection of the sensors
in the installation was successful.
next
DASHBOARD stop
7