Tristan Auron 8.0 Elite Bedienungsanleitung Seite 26

-If the fabric consists of various kinds of fibers, you must always select the lowest
ironing temperature to iron the composition of those fibers.
- Synthetic fibre and silk fabrics should be ironed on their inner side to avoid being
shone.
-Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keeps the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Use a dry cloth
as a mat and then select the corresponding fabric setting for ironing.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around
any such object.
-Before activate the clean function, make sure that the water in the tank is sufficient,
and prepare a high temperature-resistant container to be placed under soleplate for
holding the dirty water sprayed from the steam hole of soleplate during the cleaning
process.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is
suggested that you should turn the article inside out and iron the reverse side.
ADDITIONAL TABLE
Setting
The first setting
The second setting
The third setting
Maximum
Temperature
70<T<120
100<T<160
140<T<210
170<T<225
25
Acetate,elastane,polyamide,polypropylene
Cupro,polyester,silk
Triacetate, viscose, wool
Cotton, flax
Fabric