Tristan Auron 8.0 Elite Bedienungsanleitung Seite 19

INTRODUCTION FOR FUNCTION INDICATORS AND BUTTONS
Fig.3
Water inlet cover
Open the water inlet cover and fill the water tank with water through the filling
aperture. Make sure that the water shall not exceed the MAX mark of water tank.
Steam toggle button
The appliance can switch between MAX and ECO steam rates by the steam toggle
button. The default setting is the MAX steam rate when the appliance is turned on.
Press steam toggle button to select your desired steam rate, and the corresponding
indicator of selected steam rate will illuminate solidly.
Indicators of MAX and ECO steam rate
Press the steam toggle button to make switch between the MAX and ECO steam rates,
and the corresponding indicator of selected steam rate will light solidly. The default
setting is the MAX steam rate when the appliance is turned on.
18