Application Possibilities; Scope Of Delivery - Honeywell LEGIC advant Montage- Und Bedienungsanleitung

Mounting and Operating Instructions
LEGIC advant reader Feller
without keypad
Item no. 027665.10.FE
with keypad
Item no. 027665.20.FE
RS-485 and Clock/Data interface
Contents
1. Care and correct use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3. Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Configuration possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. Terminal allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7. DIP switch setting for RS-485 interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8. Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Demounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10. Application of data carriers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11. Application and operation with AC panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12. Application with IDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13. IDS Operating Instruction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
for IK3 EU BUS-2, DCM BUS-2
14. IDS Operating Instruction 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
for IK3 EU BUS-2 und DCM BUS-2
15. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Care and correct use
Tap the device lightly with fingertips. Never strike or apply strong pressure to the
device. The use of hard or sharp objects, including fingernails, rings, etc. can cause
scratches and damage the device.
To clean: Wipe the device with a dry soft lint-free cloth, or one that has been lightly
dampened with water. If necessary a household glass and window cleaner can be
used. The use of caustic liquids such as benzene, thinners, alcohol, solvents, or
abrasive cleaners of any kind will lead to surface deterioration and damage.
2. General
2.1 Uses
This reader is suitable for installation into "Feller EDIZIO" flush-mounted boxes in
combination with "Feller EDIZIO" plastic bezels.
It can be used for general indentification, for access control applications in general
and with the AC option of time management systems (in combination with ACS-2
plus controllers) and conditionally for intrusion detection technique (details see
chapter 11, 12).
2.2 Features
• Extremly flat construction (It pokes out of the wall only 7.3 mm)
• Installation into "Feller EDIZIO" flush-mounted boxes
• Seperated construction (two modules in general)
- Front module with integrated reader system, three LED lightning fields
- Back module with integrated interface, Piezo buzzer
- Switching regulator (8 to 30 V DC)
- Screw terminals (lift system)
• Reading technology: LEGIC prime, LEGIC advant
P30731-45-002-02
2017-06-28
up to V10. xx, IK3 EU conventional. . . . . . . . 9
from V11.xx
2.3

Application possibilities

• Access control
Up to 16 readers on ACS-8, RS-485 via Communication module
Up to 2 readers on ACS-2 plus via Clock/Data interface
• Intrusion alarm systems (readers with RS-485 interface only)
Up to 4 readers on IK3 EU BUS-2 and IK3 EU conv.
Up to 2 readers on Door Controller Module for MB BUS-2
• Time management (access control option with ACS-2 plus controllers)
• General user identification
System requirement:
ACS-2 plus from V01.xx (only LEGIC prime on Clock/Data)
ACS-8 from V06.xx (RS-485)
IK3 Evaluation unit BUS-2 from V07.xx
IK3 Evaluation unit conv. from V04.xx
Door Controller Module BUS-2 from V10.xx
3. Scope of delivery
Back module
Front module
4. Construction
4.1 Overview
Feller f.m. box
Back module
4.2 Installation examples
Installation with "Feller EDIZIO" plastic bezels:
Ecample with white bezel,
reader without keypad
Pin row for LEDs and keypad
Terminal block
9 poles, pluggable
4 clamping sleeves
Feller EDIZIO plastic bezel
Front module
Ecample with black bezel,
reader with keypad
D
Subject to change
without notice
GB