Weekly Timer Operation - Hitachi RAR-6NE2 Anleitung

WEEKLY TIMER OPERATION

● It is possible to select Mode A or Mode B. For each mode, up to 6 programs can be set per day. In total, a
maximum of 42 programs can be set for a week for each mode.
If calendar and clock are not set, the reservation setting for WEEKLY TIMER cannot be set.
●
If calendar and clock are not set correctly, WEEKLY TIMER will not operate correctly.
●
Reservation for calendar and clock shall be set first before operating WEEKLY TIMER.
●
Step 1 : Set the reservation schedule to the remote controller. Send the registered reservation to indoor
unit and then operate.
Step 2 : Select Mode A or Mode B and activate or deactivate WEEKLY TIMER .
Step 3 : Copy and cancel the reservation schedule.
Step 1 : Set reservation schedule to the remote controller. Send the registered reservation
to indoor unit and then operate.
■ How to set a WEEKLY TIMER.
1. Select Mode A or Mode B
1
Press (WEEKLY) button.
display. (Mode A is selected).
2
Press (WEEKLY) button again,
(Mode B is selected).
If no reservation has been made, ON/OFF,
●
● If reservation has been made, ON/OFF,
2. Set a program
Press (WEEKLY) button for about 3 seconds. The selection mode
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
3. Select the desired day of the week
Press (DAY) button.
The day changes from Mon
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
3
Fri [weekday] Sat, Sun [weekend]
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
After reservation has been set, it is easy to check and edit at the same
●
time.
4. Press button to select a program number.
The number changes from 1
● If program number has been set, follow above in order to make
changes.
4
- 23 -
lights up. and
and blink on the display.
,
, will not appear.
Tue Wed Thu Fri
Mon, Tue, Wed, Thu,
Mon Tue ......
2 3 4 5 6
blink on the
appear.
Sat Sun
1 2 .....