Hitachi RAR-6NE2 Anleitung Seite 19

E L A V E H O M E L ( ) H
Prevent the room temperature from falling too much when no one is at home. The initial setting temperature is 10°C and the
temperature range can be set between 10°C and 16°C.
This operation is able to operate by "Continuous operation" or "Day timer operation". Please use "Day timer operation" to
set the number of days up to 99 days.
Continuous operation
2
1
Day timer operation
2
1
3
4
NOTE
●
After reaching the set number of operation days for Leave Home or by pressing the (Leave Home) button again,
the unit will operate in previous mode.
●
During Leave Home operation, fan speed and horizontal air defl ector position cannot be changed.
●
By pressing (Leave Home) button, implementation of Weekly Timer or Once Timer is cancelled.
●
In case of power supply shut down, after autorestart, all setting for number of days operation will be reset and unit
shall be in continuous operation.
●
POWERFUL, ECO SLEEP TIMER and ECO operations are not applicable during Leave Home operation.
O P E R T A O I N
■ To start LEAVE HOME operation
Option 1. Continuous operation.
1
Press
Room temperature is set at 10°C and heating operation starts.
2
Set the desired room temperature with the TEMPERATURE buttons.
Temperature range can be set between 10°C and 16°C.
" ", " ", "
on the LCD.
Option 2. Day timer operation.
Press
Room temperature is set at 10°C and heating operation starts.
Set the desired room temperature with the TEMPERATURE buttons.
Temperature range can be set between 10°C and 16°C.
" ", " ", "
on the LCD.
3
Set number of operation days (1 to 99 days), if needed.
Press (TIME) button to select number of days.
Number of days blink.
* Press "
1 day to 99 days.
* Number of day is counted when clock indicates 0:00.
4
Press
Display for number of operation days will stop blinking.
Press
or to have continuous operation.
To cancel LEAVE HOME operation
●
Press (START/STOP) button. Or
●
Press (LEAVE HOME) button again.
Return to previous operation mode. Or
●
Change to other operation mode by pressing
- 19 -
(LEAVE HOME) button during stop or operation.
", " ", "SET TEMPERATURE" is displayed
(LEAVE HOME) button during stop or operation.
", " ", "SET TEMPERATURE" is displayed
(UP)" or " (DOWN)" to set number of days from
(SEND) button to confi rm number of operation days.
(CANCEL) button to reset number of operation days
(MODE) button.