Klarstein Silent Service Handbuch Seite 33

TROUBLESHOOTING
Problem
Fan will not start.
Fan sounds noisy.
Fan wobbles.
Possible Cause
Fuse or circuit
breaker blown.
Loose power line con-
nections to the fan.
Speed controller not
in correct positon.
Top canopy touch-
ing ceiling.
Loose fan blades screws.
Ceiling fan not secured
against ceiling.
Incorrect speed controller.
Fan blades are not
horizontal to ceiling.
Blade screws are loose.
Suggested Remedy
Check main and branch
circuit fuses or circuit
breakers.
Check line wire con-
nections to fan.
Check speed con-
troller's position.
Lower canopy form ceil-
ing to ensure minimum
3 mm clearance.
Re-tighten all screws
on fan blades but
never over-tighten.
Re-tighten all screws in
the hanging bracket or
plate.
Change the control-
ler to one supplied.
Measure from ceiling
to tips of blades,then
rotate fan so all blades
are checked for equal
height from ceiling(not
adjustments may be made
by slight pressure up or
down on blade holders).
Make sure all screws
are securely fastened.
EN
33