Before Use - MINI MOKA GR-0203 Handbuch

- Keep the working area clean and well lit. Clutte-
red and dark areas invite accidents.
- Do not place the appliance on hot surfaces,
such as cooking plates, gas burners, ovens or
similar.
- Do not place the appliance in an oven cavity or
similar.
- Keep children and bystanders away when using
this appliance.
- The appliance must be used and placed on a
flat, stable surface.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- Do not force the power cord. Never use the
power cord to lift up, carry or unplug the
appliance.
- Do not wrap the power cord around the applian-
ce.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Take the necessary measures to avoid starting
the appliance involuntarily.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not force the appliance's work capacity.
- This appliance should be stored out of reach of
children and/or the disabled.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or jam-
med and make sure there are no broken parts
or anomalies that may prevent the appliance
from operating correctly.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- CAUTION: There is a risk of fire if the
appliance's cleaning is not done according to
these instructions.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- WARNING: Do not use without tank properly
positioned. As described in section of assembly
the tank
ASSEMBLING OF THE HOPPER: (FIG. 1)
- Due to transport, the hopper comes dismantled
- Unscrew the screw fixed on the mill holder
- Put the hopper on the mill holder and be sure
that holes are aligned
- Place again the screw.
GRINDING SIZE REGULATOR:
- The suitable grinding size depends on the
characteristics of the bean, humidity and toast.
Not all types of coffee have the same charac-
teristics, so is recommendable to do a trial run
with each coffee batch and if necessary adjust
the grinding size.
- To select the finest ground size, turn the knob
regulator clockwise
- To select more coarsely ground size, turn the
knob regulator anticlockwise
- If is difficult turn the knob, probably a rest coffee
bean locks the mill. Connect the appliance and
switch ON few seconds