How Do I Connect My Composite Monitor - Commodore A 520 Bedienungsanleitung

English
7
3. Plug one end of the TV connector cable into the VHF antenna te r­
minal.
4. Plug the other end of the TV connector cable into the A 5 20's RF
OUT port.
5. Connect the main stem of the y-audio cable into the AUDIO IN port
of the side of the A 520.
6. Connect the other two ends of the y-audio cable in the L AUDIO
and R AUDIO on the back of the Amiga computer.
7. Set the channel selectorswitch on the A 520 to LorH. (L=5,5 MHz;
R = 6 MHz).
8. Set the channel on yourTV set to the same channel.
How do I connect my composite monitor?
1. Make sure both the monitor and the Amiga are OFF.
2. Grasp the A 520 and line up its R G Bconnectorwith the RGB video
port on the back of the computer.
3. If your monitor has its own cable, connect this cable to the Video
OUTport on the A 520.O therwise,connect one end of theTVconnec-
tor Cable to the Video IN port on the m onitor and the other end to
Video OUT on the A 520.
4. Connect the main stem of the y-audio cable into Audio on the
monitor.
5. Connect the othertwo ends of the y-audio cable to the LAudio and
R Audio on the back of the Amiga.
6. Turn the m onitorand the Amiga ON. Your Amiga is nowreadyto use.