How Do I Connect My Composite Monitor - Commodore A520 Bedienungsanleitung

English 7
3. Plug one end of the TV connector cable into the VHF antenna ter-
minal.
4. Plug the other end of the TV connector cable into the A 520's RF
OUT port.
5. Connect the main stem of the y-audio cable into the AUDIO IN port
of the side of the A 520.
6. Connect the other two ends of the y-audio cable in the L AUDIO
and R AUDIO on the back of the Amiga Computer.
7. Set the channel selector switch on the A 520 to L or H. (L = 5,5 MHz;
R = 6 MHz).
8. Set the channel on your TV set to the same channel.

How do I connect my composite monitor?

1. Make sure both the monitor and the Amiga are OFF.
2. Grasp the A 520 and line up its RGB connector with the RGB Video
port on the back of the Computer.
3. If your monitor has its own cable, connect this cable to the Video
OUT port on the A 520. Otherwise, connect one end of the TV connec-
tor Cable to the Video IN port on the monitor and the other end to
Video OUT on the A 520.
4. Connect the main stem of the y-audio cable into Audio on the
monitor.
5. Connect the other two ends of the y-audio cable to the L Audio and
R Audio on the back of the Amiga.
6. Turn the monitor and the Amiga ON. Your Amiga is now ready to use.