Routine Cleaning, Service, Transport & Storage - Caframo BDC1850 Bedienungsanleitung

Page 13
Downloaded from www.Manualslib.com
Routine Cleaning, Service, Transport & Storage
Cleaning
Using a mild soap and water solution, wipe the housing and keypad of the stirrer with a
damp cloth.
Note:
Do not use chlorine bleach, chlorine-based cleanser, abrasives, ammonia, steel
wool or scouring pads with metal content or similar harsh solvents or abrasives.
These will damage the surface of the instrument.
Service
For qualified repair technicians, disconnect power before servicing.
The BDC1850, BDC3030, BDC6015, are all fused with a "one-use" internal 3 amp fuse.
The BDC1850-220, BDC3030-220, BDC6015-220 are all fused with a "one-use" internal
3 amp fuse.
Do not attempt to service or repair a Caframo BDC stirrer. Contact Caframo for return
authorization and instructions. See page 4.
Transport and Storage
1. Place the unit and its parts into the original packing or a container with the
necessary protection to prevent breakage during transport. Seal the original
packing or container with packing tape.
2. Store the packed unit in a dry place.
CAUTION:
When transporting this unit ensure it is not dropped or subject to unnecessary
jolts.
Failure to clean, service, and handle the stirrer as outlined can cause the unit to
fail and impair the safety of the user.
manuals search engine