Maintenance - MAST M.4 Bedienungsanleitung

MAINTENANCE

Care and maintenance
•
Inspect all screws, rivets and other parts regularly to ensure they
are secure and safe and replace any parts that are in poor
condition. It is very important to thoroughly clean and dry the
pushchair after use in winter, by the sea, in the woods or in the rain.
Sea salt can cause the metal parts to corrode. After use in these
conditions, wipe down with clean water and dry thoroughly.
•
When used on the beach, wash away any sand from the wheels
and axles every day to prevent the axles from becoming worn and
the wheels from rusting and becoming stuck. Wash the wheels and
axles with clean water, dry and re-lubricate.
•
Regularly check that the pushchair's locking device is working
properly.
•
If you find any parts on the pushchair that are damaged, stop
using the pushchair and contact the seller immediately.
•
Do not expose the pushchair to strong sunlight for extended
periods of time. Even exposure to ultraviolet light during normal use
may cause the fabric to fade.
•
Be careful not to tear the fabric when loading or transporting the
pushchair in a vehicle.
•
Low viscosity oils or lubricants may be used on the pushchair's
mechanical components.
41