GE Druck PV 210 Handbuch Seite 5

Introduction
This manual provides operating instructions for the PV 210 Low Pressure Pneumatic hand-
pump.
Safety
The manufacturer has designed this equipment to be safe when operated using the procedures
detailed in this manual. The user must not use this equipment for any other purpose than that
stated.
This manual contains safety and operating instructions that must be followed to make sure of
safe operation and to keep the equipment in a safe condition. The safety instructions are either
warnings or cautions issued to protect the user and the equipment from injury or damage.
Use suitably qualified technicians
manual.
Pressure
Do not apply pressure greater than the maximum safe working pressure stated in the
specification.
Toxic Materials
There are no known toxic materials used in construction of this equipment.
Maintenance
The equipment must be maintained using the procedures in this publication. Further
manufacturer's procedures should be done by an authorized service agents or the
manufacturer's service departments.
Technical Advice
For technical advice contact the manufacturer or subsidiary.
*
© 2005 Baker Hughes, a GE company – All rights reserved.
Downloaded from www.Manualslib.com
A qualified technician must have the necessary technical knowledge, documentation, special test
equipment and tools to carry out the required work on this equipment.
manuals search engine
*
and good engineering practice for all procedures in this
PV 210 Instruction Manual-English | 1