Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Connection
EN 10
Electrical connection
The mains power supply must correspond to the rating indicated on the
plate situated inside the hood.
If provided with a plug, connect the hood to a socket in compliance with
current regulations and positioned in an accessible area.
If not fitted with a plug (direct mains connection) or if the plug is not
located in an accessible area, fit a double pole switch that will allow
complete disconnection from the mains under the conditions of
overvoltage category III, in accordance with installation instructions.
Attention! Before re-connecting the hood circuit to the mains supply
and checking that it works correctly, always check that the mains cable
is properly fitted.
The hood is provided with a special power cable; if the cable is
damaged, request a new one from our technical services department.
Werbung
Kapitel
Inhaltsverzeichnis
