Use And Maintenance - PREVOST DRF Serie Montage- Und Gebrauchanweisung

Put a ball-tap on the piping network of the hose reel in order to make the maintenance operations
easier. The said ball-tap can be used as a safety valve for dangerous situations.
WARNING: THE MANUFACTURER LIMITED WARRANTY DOES NOT APPLY TO DAMAGES
CAUSED BY FAULTY INSTALLATION OR MISUSE OF THE PRODUCT. THE HOSE REELS MUST
BE INSTALLED AND MAINTAINED IN COMPLIANCE WITH THE MANUAL AND INSTRUCTIONS
FURNISHED WITH EACH HOSE REEL.

3. USE AND MAINTENANCE

required length only.
The automatic device to stop the hose is working on an area corresponding to one turn of the drum.
To rewind the hose, put a light traction on it..
Always hold the hose when you rewind it in order to avoid damages to the machine, injuries
to people or to surrounding things.
IMPORTANT: Any maintenance operation shall be carried out by a suitably trained staff
following carefully the information given in this manual.
1. The correct operation of the hose reel.
We advise you to contact the manufacturer for any possible anomaly and before replacing any part.
WARNING! Before starting any operation in the reel:
2. Remove the hose rubber stopper and release the hose slowly until the spring is completely
unloaded.
1. The seal inside the swivel joint.
parts list, page 11)
Installation is possible on the ceiling and on
the wall and will be carried out with a revolving
support using 2 screws. In every case, the
hose reel has to be mounted verticaly and in
a central position for the hose rolling.
9