Technical Specifications; Ordering Information For The Sterisart; Universal Pump - Sartorius Stedim Biotech Sterisart 16419 Bedienungsanleitung

13.

Technical Specifications

Dimensions pump in mm:
Dimensions pump with holding ring
for bottles, container for draining in mm:
Weight: Basic model 16419:
Maximum operating temperature:
IP protection class:
Electrical connection
Voltage:
Frequency:
Power consumption:
Pump
Pump flow rate:
Tubing
Correct functioning of the Sterisart
has been approved by Sartorius Stedim Biotech.
Materials
Base plate, lever, bow, rotor:
Housing, connection port, support rod,
holding ring for bottles:
Connecting cable:
Container for draining, plastic sleeve for lever, PET
hydrodynamic bearing for bow:
Hydrodynamic bearing for lever:
Seals, gaskets, drain tubing:
14.

Ordering Information for the Sterisart

16419
16973
1ZG---0009
1ZF---0004
1ZA---0002
1ZW---0002
1ZE---0033
1ZF---0013
1ZG---0022
1ZB---0001
1ZF---0007
1ZS---0005
1ZS---0002
1ZL---0003
1ZG---0023
1ZG---0024
1ZG---0014
1ZG---0039
1ZE---0041
Additional accessories are available on request.
10
Downloaded from www.Manualslib.com
(W + D + H) approx. 336 + 260 + 210 (with lever)
(W + D + H) 440 + 365 + 485
Approx. 13.5 kg
40°C
41
100–240 VAC (alternating voltage)
50–60 Hz
100 VA
70–650 ml/min (depending on the tubing)
® Universal pump is only guaranteed when used with tubing that
Stainless steel 316L (1.4435)
Stainless steel 316 (1.4401)
PVC
Iglidur X
Silicone
Sterisart ® Universal pump, basic model
Ampoule tongs
Holding ring for bottles
Fastening arm
Drain tubing
Ampoule breaker
Foot switch
Stand
Container for draining
Plastic sleeve for lever
Wing nut
Bow
Lever
Rotor
Cover for container for draining (Sterisart
Cover for container for draining (Millipore sterility test units)
Adaptor for Sterisart ® container for draining for use with a Millipore Equinox pump
Transport trolley
Installation kit isolators
manuals search engine
®

Universal Pump

® sterility test units)