Herunterladen Inhalt Inhalt Diese Seite drucken

Ferm LMM1012 Originalbetriebsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
• Frequently inspect the condition of the
cutting blade. Damaged blade must be
replaced immediately. Follow all the required
precautions when replacing the blade.
• Before use check the supply and extension
cord for signs of damage or ageing. If the cord
becomes damaged during use, disconnect the
cord from the supply immediately.
• DO NOT TOUCH THE CORD BEFORE.
DISCONNECTING THE SUPPLY.
• Not to connect a damaged cord to the
supply or touch a damaged cord before it is
disconnected from the supply. A damaged
cord can lead to contact with live parts.
• Do not use the mower if the cord is damaged
or worn.
• Read the instructions carefully. Be familiar with
the controls and proper use of the equipment.
• Keep extension cord away from cutting blades.
• Wear eye and ear protection. Wear dust
protection if the mowing action causes the
raising of dust or particles.
• Never allow children, infirm people or people
unfamiliar with these instructions to use this
mower.
• Avoid using the mower while people, especially
children and the infirm, or pets are nearby.
• Use the mower only in day light or good
artificial light.
• Never operate the mower with a damaged base.
• When starting up and when the machine is in
operation, keep the cutting section away from all
parts of the body, especially the hands and feet.
• Do not start the machine when it is not in the
operating position.
• Thoroughly inspect the mower for loose or
damaged parts before each use. Do not use
the unit until adjustments or repairs are made.
• Use only the manufacturer's recommended
replacement parts and accessories.
• Always disconnect the mower from the mains
when leaving it unattended.
• Switch the motor off and pull out the plug when
the machine is not being used, being cleaned,
being moved from one place to another or
when the blade is being changed or adjusted.
• If there is an interruption to the power supply
or the extension cable is damaged, switch off
the machine immediately and remove the plug
from the power point.
• Inspect and maintain the mower regularly.
Have the mower repaired only by an authorised
repairer.
• If power cord is damaged, only have it repaired
or replaced by an authorised service centre.
• Check that all grass cuttings and dirt have
been removed from the ventilation vents.
• When not in use, store the mower out of the
reach of children and infirm people.
WARNING: In order to reduce the risk,
disconnect the plug from the supply
power, only use recommended
accessories as required, otherwise
personal injury may result.
• Do not switch on the machine in enclosed or
poorly ventilated spaces or in the presence
of inflammable and /or explosive substances
such as liquids, gasses and powders.
• Always stop the mower and switch off at the
mains when cutting is delayed, emptying the
grass box or when walking from one cutting
location to another.
• Do not cross roads or gravel paths with the
machine still running.
• Do not move the machine by pulling on the
electrical cable. Always use the handgrip.
• Keep a balanced and stable stance while using
the machine.
• Ensure that the area being cut is free from
strings, stones and debris. Remove any
objects that could be thrown during cutting
or could wind around the cutting mechanism.
Carefully check the area to be mown for
wildlife such as hedge hogs, frogs etc. And
move them to a safe location
• If you hit or become entangled with a foreign
object, stop the motor and disconnect from
the mains immediately to check for damage.
Repair any damage before further operation is
attempted.
• Do not operate the mower with loose or
damaged parts.
• Do not cut against hard objects. This could
cause injury to the operator and damage to the
machine.
• Keep your hands, face and feet away from all
moving parts.
• If possible, avoid cutting wet grass.
• Exercise proper caution when mowing on sloping
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis