Warranty; Service And Maintenance - Ferm LMM1012 Originalbetriebsanleitung

Securing the power cord
Fig. A, N
Mount the cable into the cable strain relief (5) as
shown on figure N.
Switching the machine on/off
Fig. A, O
Do not start the mower if it is standing in
long grass.
• To start the machine, press and hold the safety
button (3) and press the on/off switch (2).
Whilst holding the on/off switch (2), you can
release pressure on the safety button (3).
• To stop the machine, release the on/off switch
(2) and wait until cutting blade stops rotating.
Always work your way away from the cables to
avoid cutting them, as shown on figure Q.

5. SERVICE AND MAINTENANCE

Maintenance
Your mower has been designed to operate over a
long period of time with minimum of maintenance.
Continuous satisfactory operation depends upon
proper mower care and regular cleaning.
• Keep the mower clean and dry.
• Regularly use a blunt scraper to remove grass
and dirt from the mower
• To clean the mower, use only mild soap and a
damp cloth. Never let any liquid get inside the
tool and never immerse any part of the tool
into liquid. Do not use any abrasive or solvent -
based cleaner.
ENVIRONMENT
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.

WARRANTY

The warranty conditions can be found on the
separately enclosed warranty card.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.
13