Predator S20PLUS Gebrauchsanweisung Seite 49

2. Introduction to Exhaust Hose Installation
a) Temporary installation
1. Twist both ends of the exhaust hose into the square fixing clip and the flat fixing clip.
2. Insert the square fixing clip into openings at back of the air conditioner (see Fig.4).
3. Put the other end of the exhaust hose to the near windowsill.
b) Window Slider Kit Installation
The installation manner of window slider kit is mostly in "horizontal" and "vertical". As shown
Fig.5 and Fig.5a, check the min. and max. size of the window before the installation.
1. Install the window kit on the window (Fig.5, Fig.5a);
2. Adjust the length of the window slider kit according to the window width or height, and
fix it with the dowel;
3. Insert the Window Connector hose to the hole of the Window Kit.
Window width
min. 67,5 cm
max. 123 cm
Fig. 4
Fig. 5
47
Window height
min. 67,5 cm
max. 123 cm
Fig. 5a