Herunterladen Inhalt Inhalt Diese Seite drucken

Marquant MCR-718 Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

LOUD ON/LOUD OFF
GB
Switching the LOUDNESS function on and off.
When the volume is low the LOUDNESS function (LOUD) expands the
sound characteristics by increasing the treble and bass sounds.
STEREO/MONO switching (only possible during radio operation).
LOCAL/DX (EON) (only available during radio operation)
Your radio can receive RDS EON data. The term „EON" signifi es the trans-
mission of additional station information within a station chain, e.g. WDR.
If a traffi c announcement (TA) is made within a station chain, the radio
switches from a station which does not transmit traffi c announcements to
one that does within the same station chain. Reception of this station data
is shown in the display by the EON symbol. You can choose between the
EONTA LOCAL and EONTA DISTANCE mode for local or long-distance
traffi c news. The purpose of this function is to prevent the radio switching
unnecessarily to an EON-TA traffi c news item. If an EON station is a long
distance away, it may be that in some cases EON TA information can still
be received from the station. The radio then switches to this EON station
and tries to receive the traffi c announcements. The signal is too weak, ho-
wever, and reception is poor as this EON station is too far away. Therefore
the radio switches back to the station that was set previously.
During the type of operation described above the listener hears the wrong
programme for a short time or nothing at all.
EONTA LOCAL:
EON TA-
DISTANCE Mode: In this mode the EONTA circuitry tries to receive the
VOL LAST/VOL ADJ
VOL LAST:
VOL ADJ:
3. LCD (liquid crystal display)
This function prevents switching to an EON station
whose signal is too weak. The radio does not switch to
this station and the listener does not hear any interfe-
rence.
EONTA information from any available transmitter and
thus improve reception quality.
The radio switches on at the actual volume it had when it
was last switched off
Press the SEL button again: A - - VOL appears in the
display. With the VOL multifunction button you can select the
desired switch-on volume.
E7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis