Operation - Marquant MCR-718 Bedienungsanleitung

GB
1. REL Button
Press the REL button to remove the front operating panel.
2. SEL Button (Select)
a) Press the SEL button briefl y to access the sound mode selection menu.
The letters „VOL" appear in the display for setting the volume. By repeated-
ly pressing the SEL button you can now select the individual menu items
such as VOL (Volume), BAS (Bass), TRE (Treble), BAL L - - R (Balance)
and FAD F - - R (Fade). The settings of the individual menu items are
changed by turning the multifunction button VOL (2).
Note: If equaliser settings such as POP and ROCK have been selected
under DSP it is not possible to adjust the BASS and TREBLE.
b) Press the SEL button for a longer time to access the selection menu:
• TA SEEK / TA ALARM
• PI MUTE / PI SOUND
• RETUNE L / RETUNE S
• MASK DPI / MASK ALL
• BEEP 2ND / BEEP ALL / BEEP OFF
• SEEK 1 / SEEK 2
• DSP OFF / FLAT / POP M / CLASSICS / ROCK
• LOUD ON / OFF
• STEREO / MONO
• LOCAL / DX
• VOL LAST / ADJ
The letters „TA SEEK" appear in the display.
Repeatedly pressing of the SEL button now brings up the individual menu
items. The settings of the individual menu items are changed by turning the
multifunction button VOL.
• TA SEEK Menu (Traffi c Announcement Station Search)
Select TA SEEK if you would like the radio to automatically search for a
traffi c announcement station when you select the TA function.
Select TA ALARM to bring up a warning message in the display as soon as
you have set a station under the TA function which does not transmit traffi c
announcements.

Operation

E5