Installation Menu; Auto Channel Scan (Retune) Menu Operation; Manual Tuning; Digital Manual Search - AEG ETV4500ZM Bedienungsanleitung

• Press OK button to quit channel list and watch TV.

Installation Menu

Press "MENU" button on the remote control and
select Install & retune by using " " or " " button.
Press OK button and the following menu screen will
be displayed.
Select Automatic Channel Scan (Retune) by using "
"/" " button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using " "/" " and OK buttons.
Auto Channel Scan (Retune) Menu
Operation
Analogue: Searches and stores analogue stations.
Digital & Analogue: Searches and stores both
analogue and aerial DVB stations.
• Whenever you select an automatic search type and
press OK button, a con¿ rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using ." " or " " and
OK button.
• After the auto channel scan type is set and selected
and con¿ rmed, the installation process will start and
the progress bar will move along. Press "MENU"
button to cancel process. Located channels are not
stored if the process is cancelled.

Manual Tuning

HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using " "/" " and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired
" " button. Manual search options will change
accordingly. Use " "/" " button to highlight an item
and then press " " or " " button to set an option.
You can press "MENU" button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use
" "/" " button to highlight an item and then press "
" or " " button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation
menu by using " " or " " and OK buttons. The
analogue ¿ ne tune screen will be displayed. The
Analogue Fine Tune feature will not be available if
- 55 -
Search Type using " " or