How To Use The Stand - iiyama prolite e2200ws Bedienungsanleitung

HOW TO USE THE STAND

HOW TO USE THE STAND
The monitor is shipped with the stand detached. Be sure to attach the stand before operating the
display and remove if it is necessary to re-box.
Install the Stand on a stable surface. The monitor may cause injury or damage if
CAUTION
it falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Installation>
1. Put a piece of soft cloth on the table
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2. The Stand-Bottom is pulled up as shown in
the figure.
3. Install the Stand-Base to the Stand-Bottom.
<Remove>
1. Put a piece of soft cloth on the table
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2. Hold down the hooks outside and pull the
Stand-Base away from the Stand-Bottom.
PLE2200WS-e-M015A01.P65 9
BEFORE YOU OPERATE THE MONITOR
9/7/2006, 8:56 PM
5