iiyama prolite e2200ws Bedienungsanleitung Seite 20

Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
7
NOTE NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps
because the Pixel Clock may not be adjusted correctly. If the flicker or blurs still
7
remain, set the refresh rate of computer to low (60Hz) and repeat steps from
Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the
Pixel Clock and Phase adjustments.
8
Put back your favorite wallpaper.
16 OPERATING THE MONITOR
PLE2200WS-e-M015A01.P65 20
and
6
again.
3
9/7/2006, 8:56 PM