Before Use; Product Assembly; Operation - cecotec SmoothForce 2000 Smart Bedienungsanleitung

ENGLISH
safe way and understand the hazards involved.
• Supervise young children to make sure that they do not play with the appliance. Close
supervision is necessary when the appliance is being used by or near children.

3. BEFORE USE

1. Take the product out of the box.
2. Make sure all the accessories are included and check for any visible damage. If any is
observed, contact the Technical Support Service of Cecotec.
3. Remove any sticker or protective element from the steam head.
4. Unwind and straighten the cord.
NOTE: When operating the garment steamer for the first time, allow it to steam for a few minutes
to remove any impurities and odours that might have been left from the manufacturing process.

4. PRODUCT ASSEMBLY

1. Remove the water tank, open the water-filling opening lid and pour water up to the MAX
mark. Place the water tank back in its place
2. Introduce the clothes brush into the steam head and press until a click sounds, indicating
that it is properly fixed. It can be attached either way.
3. Connect the appliance to a power outlet and press for 2 seconds the On/Off touch button
in order to switch it on. The indicator light will flash for a few seconds, once it turns steady,
the product is ready to be used.
NOTE: once the water tank is full and the appliance is connected to the power supply, allow it
to preheat for a few seconds.
WARNING: do not exceed the MAX. mark when filling the water tank.

5. OPERATION

• The garment steamer is easy to use and is perfect for removing wrinkles from garments
and curtains.
NOTE: The garment steamer is designed to be used in an upright position on hanging
garments. Make sure there is ventilation behind the garment.Set the thermostat to the
desired temperature:
1. Press the steam push button to activate the steam-ironing function.
12 SMOOTHFORCE 2000 SMART