Peltor G2000 Bedienungsanleitung Seite 8

CE-MARKING
E
F
G
EN 397:1995
-30° C, LD, MM
EN 397:1995
-30° C, LD, MM
440 vac
Test certificate issued by the Swedish National Testing and Research Institute,
SP, Box 857, SE-501 15 Borås, Sweden. ID#0402.
(3)
Spare parts
(3:1) Interior lining Plastic sweatband G2C, Leather sweatband G2D
(3:2) Sweatband Plastic HYG3, Leather HYG4
(4)
Accessories
(4:1) Rain shield Orange GR3C, Orange/Fur GR3D, Yellow GR3C GU
(4:2) Hearing protectors according to separate brochure
(4:3) Visors and mesh visors according to separate brochure
(4:4) Chinstrap GH2
(4:5) Attachment for visor
(4:6) Six-point suspension G2E
(4:7) Attachment for lamp and cord. GLF, (black)
(4:8) Attachment for glasses. GLF-B, (black)
COMPREHENSIVE HEAD PROTECTION
When you use other protective equipment together with your helmet, it is important that all the
components included in the helmet system fit together without compromising the special comfort
and convenience requirements applied to each individual component in the system. It is vital that
there is sufficient space for the hearing protector and that it can be conveniently adjusted to fit the
ears; in other words, the helmet itself should not extend too far down or there should be cutouts
to accommodate the hearing protectors. The combination of helmet and visor must also function
properly as regards the distance to the face, focus of vision, sealing etc. Your Peltor helmet can be
supplemented with other Peltor equipment such as hearing protectors, visors and communication
systems. Only approved hearing protectors which meet the requirements stipulated as per Euro-
pean norm EN 352-3 may be used together with this helmet.
H
0402
I
0402
J
(E) Test lab. ID no.
(F) European standard
(G) Low temperature
(H) Lateral rigidity
(I) Molten metal spatter
(J) Electrical insulation
3