Herunterladen Inhalt Inhalt Diese Seite drucken

Seat; Brakes; Operation; Getting In And Out - B+B TS-1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für TS-1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

TS-1 / SL
| commode chair

4.4. Seat

Seat height (TS-1 SL only)
The TS-1 SL model can be adjusted in height in 5 positions. Do this
with an assistant or lay down the chair.
To do so, remove the four locking pins on the frame (Fig. 07).
Then lift the frame upwards until the required height is reached.
Then re-attach the locking pins.
07
Seat
The seat has a non-slip bottom. It can be easily removed before using
the toilet.
Commode seat
Removing commode seat:
Pull front edge of seat up from the base.
08
Lift commode seat upwards.
Positioning commode seat:
Slide back edge of seat with the open corners
to the back.
Press front rounded edge of seat down to the stop.
Seat must lock into position.
Make sure that it is locked.
09

4.5. Brakes

The rear wheels of the TS-1 are fitted with locking brakes. To apply
the brakes, push down on the overhanging part of the pedal with your
foot (Fig. 09). To release the brake, step on the innermost part of the
pedal to push it down (Fig. 10).
10
30

5. Operation

5.1. Getting in and out

It is easy to get in and out of the TS-1. The foot plate and the two
arm rests can be folded out of the way.
Getting in and out from the side:
Move the commode chair as close as possible to the seat on which
you are sitting.
Make sure that the seat is in a secure and stable position.
Lock the commode chair by setting the parking brakes.
Fold the arm rest out of the way.
Then fold the foot plate up.
Now slide sideways onto the seat of the TS-1.
Make sure that you are sitting as far back in the seat as possible.
Now the arm rest and the foot plate can be returned to their
normal position.
Getting in and out from the front:
Move the commode chair as close as possible to the front of the
seat.
Lock the commode chair by setting the parking brake.
Fold the foot plate up.
Make sure that the seat is in a secure and stable position.
Now slide onto the seat of the TS-1 by turning your body around.
Make sure that you are sitting as far back in the seat as possible.
Now fold the foot plate down and place your feet on it.
Bischoff & Bischoff GmbH | 28.05.2020 - Revision: 1
TS-1 / SL
commode chair |
31

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ts-1 sl

Inhaltsverzeichnis