INAC RS-150 Montageanleitung Seite 3

Instructions Instrucciones
Please read and save these instructions
GB
Dear Customer,
Thank you for choosing a INAC product. We hope your new appliance with your
expectations.
We suggest you read this document carefully in order to ensure that the appliance
operates properly.
This document informs you on how to proceed in the event of a failure.
Nevertheless, there is no need to worry, because Inac enjoys a qualified network
of service engineers and our after-sales service can be found close to vour home.
However, please accept our advice: If the machine does not seem to be working
properly, before calling the service engineer there are a number of things you
might check by simply using this booklet.
And ultimatelv saving time and money. If despite these checks, your appliance is
still not running properly, there is no need to worry: The Inac after-sales service
is fast, trustworthy and always willing to help!
INAC Electrónica para radiocomunicaciones P.O. 3101
Tel. +34 976 322 822 http://inac-radio.com e-mail: inac@inac-radio
Gebrauchs Instructions
50080 Zaragoza España
Pág.: 4
Instructions Instrucciones
introduction
Radio amateurs need to have immediately at its facilities in a coaxial cable to
power an antenna, it is the smallest unit to begin operations on the radio. But
when their needs and concerns increased need more antennas to cover more
bands. It is time to put another coaxial by his house to get to the roof or roof to
place the new antenna.
This situation has no limit and more cables are placed for more bands.
Our switch RS-150 remote antennas, coaxial cable provided for each placed three
new outlets for three antennas on the roof and two outputs act on two radio equi-
pment. Without control cable or new element between the radio room and the
roof.
The utility is huge, as each coaxial cable between the roof and the radio room can
be used two antennas.
Only limitation, it should be noted, that can not be used simultaneously anten-
nas. It is reasonable since the drop cable remains unique so it is not usable at the
same time in two different activities.
It is a clear example if we put on the roof in each of our unit connectors (RS -150)
Outdoor antenna:
1- Antenna 144 Mhz.
2- HF antenna Vertical
3- Antenna AH-521
And at the base:
1- equipment 144 Mhz.
2- Equipment HF
With this arrangement we can work on HF and VHF, but we can not hear 144
MHZ while we are using even just listening HF.
INAC Electrónica para radiocomunicaciones P.O. 3101
Tel. +34 976 322 822 http://inac-radio.com e-mail: inac@inac-radio
Gebrauchs Instructions
50080 Zaragoza España
Pág.: 5