Hama 00183376 Bedienungsanleitung Seite 3

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized
with a dangerous voltage of sufficient magnitude
to constitute a risk of electric shock.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• 1x charging station
• 1x power cord
• 1x holder
• These operating instructions
3. Safety Notes
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to
any major shocks.
• Do not operate the product outside the power
limits given in the specifications.
• Do not modify the device in any way. Doing so
voids the warranty.
• Do not continue to operate the device if it
becomes visibly damaged.
• Use the product for its intended purpose only.
• Keep this product, as all electrical products, out of
the reach of children!
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Always pull directly on the plug when
disconnecting the cable, never on the cable itself.
• Dispose of packaging material immediately
according to locally applicable regulations.
2
Risk of electric shock
• Do not open the device or continue to operate
it if it becomes damaged.
• Do not use the product if the AC adapter,
adapter cable or power cable is damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
4. Operation
Note – Mains voltage 100 – 240 V
The charger is suitable for a mains voltage of
100-240 V and can be used around the world.
Please note that a country-specific adapter may
be necessary.
Warning – Connecting terminal
devices
• Before connecting a terminal device, check
whether the power output of the charger can
supply sufficient power for the device.
• Ensure that the total power of all connected
terminal devices does not exceed 65 W.
• Please refer to the instructions in the operating
manual of your terminal device.
Note – Power Delivery
• Plug & GO: no additional software required,
simply plug in and start:
Thanks to Power Delivery/Thunderbolt™ 3/
Quick Charge, the voltage and power are
adjusted automatically.
• Be aware that, for efficient and optimised
charging, your terminal device must support
the PD (Power Delivery)/TBT3 (Thunderbolt™
3)/QC (Quick Charge) function.
• If you have a large number of PD/TBT3/
QC-enabled terminal devices with different
firmware updates, it may be that the function
is not fully supported.