Bluetooth ® Pairing - Hama MyVoice 1300 Bedienungsanleitung

4. Getting Started
• The headset is equipped with a rechargeable battery. The battery
must be fully charged before using the device for the first time.
• Ensure that the headset is switched off before charging it.
• Begin charging by connecting the USB plug (11) of the charging
cradle (8) to a suitable USB connection, for example, on a PC/
notebook, or to a suitable USB power supply unit. Then place the
headset in the charging cradle.
• The status LED (3) lights up constantly in red during the charging
process.
• Charging the battery fully may take up to 2 hours.
Warning
Do not use the headset while it is charging.
• When the battery is fully charged, the status LED (3) is lit white.
• Disconnect all cable and mains connections after use.
Note
If you have not used the item for a few month, it may take 15-30
minutes for the status LED (3) to red when charging.
5. Operation
Switching the headset on/off
• Turn On:
Switch on the headset using the on/off switch (1). A voice says,
'Power on' and the LED indicator (3) flashes white.
• Turn Off:
Switch off the headset using the on/off switch (1). The LED
indicator (3) briefly lights up white and a voice says, 'Power off'.
The first time the device is turned on, pairing is automatically started
– see 5.1 Bluetooth
5.1. Bluetooth
Note – Pairing
• Make sure that your Bluetooth
and Bluetooth
• For more information, please refer to the operating instructions of
your terminal device.
4
pairing.
®
pairing
®
is activated.
®
-capable terminal device is on
®