Herunterladen Inhalt Inhalt Diese Seite drucken

Subsequent Use - Philips Lumea plus TT3003 Bedienungsanleitung

Ipl haarentfernungssystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28

Subsequent use

-
Intensity light 1 goes on automatically to indicate that the appliance is
switched on at default intensity 1.
3 Apply one flash at the lowest recommended intensity for your skin type.
4 As long as it feels comfortable (not painful), increase the setting by one
level within the recommended range for your skin type and apply one
flash for each setting. Do not apply more than one flash on the same
spot.
5 After the skin test, wait for 24 hours and check your skin for any reaction.
If the skin shows reactions, choose the highest setting that did not result
in any skin reaction for subsequent use.
1 Before every treatment, clean the body attachment, light exit window
and metallic frame of Philips Lumea Plus for men.
2 Press the on/off button to switch on the appliance.
-
Intensity light 1 goes on automatically to indicate that the appliance is
switched on at default intensity 1.
Note: It is normal that the appliance and the attachment become warm
during use.
3 Start each treatment by selecting the light intensity very carefully, based
on your skin's sensitivity and on how comfortable the treatment feels.
Your skin may react differently on different days/occasions for a number
of reasons. See section 'Possible side effects and skin reactions' in this
chapter for more information.
4 Press the intensity increase button to increase the intensity. To lower the
intensity, press the intensity decrease button.
-
Every time you press the button, the corresponding intensity light
starts to flash. This takes a few seconds.
17
English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lumea plus tt3003/11

Inhaltsverzeichnis