Philips VisaPure Advanced SC53 Serie Bedienungsanleitung Seite 24

24
English
Fresh Eyes head
The Fresh Eyes head is suitable for all skin types. We advise you to
use it once a day in the morning.
Fresh Eyes head program
The Fresh Eyes head program consists of 2 treatment periods of 15
seconds.
The Fresh Eyes head program has 2 speed settings. At speed 1, the
head vibrates. At speed 2, the head vibrates and rotates.
Note: The rotation direction is optimized for the skin zone treated.
Start below your right eye. When the appliance pauses after 15
seconds, move to the area below your left eye.
Using the Fresh Eyes head
You can use the Fresh Eyes head on dry skin or after applying cream
to your skin.
1 Push the Fresh Eyes head onto the connection pin until it locks
into position with a click (Fig. 34).
2 Press the on/off button to switch on the appliance and choose
your preferred setting.
Note: When you attach a different head the appliance recognizes
it. You hear a beep and the speed indication flashes alternately.
(Fig. 35)
3 Place the Fresh Eyes head on the bony area below the right eye.
Gently move the head from the nose towards the temple and
repeat this movement (Fig. 36).
Do not push the head too hard onto the skin to make sure the
treatment remains comfortable.
4 After 15 seconds, the appliance pauses briefly to let you know that
you have to move it to the area below the left eye (Fig. 37).
5 When the program is finished, clean the Fresh Eyes head with
water and mild soap.