EDIFIER W330NB Bedienungsanleitung Seite 5

III. Pairing
• Please follow the steps below to let the headphone enter pairing mode:
Function Operation
When turned off, press and hold the
Enter
multifunctional button for about 5 seconds;
pairing
In standby, press and hold the multifunctional
mode
button for about 3 seconds.
• Set your Bluetooth mobile phone to search for and pair with "EDIFIER W330NB",
wait until hearing a prompt tone and the blue light will flash slowly, then
the pairing is successful.
Note:
• The headphone will exit pairing mode if fail to pair within 2 minutes, and
will auto-turn off if not connected within 5 minutes after timeout.
• Pin code for connection is "0000" if needed.
• After pairing is complete, the headphone and mobile phone will
remember each other, and the headphone will auto-connect to the
device connected last time when used again.
Connect two Bluetooth devices simultaneously
• Pair the headphone with the first device;
• Turn off the headphone, then press and hold the multifunctional button
to turn on the headphone and let it enter pairing status, to pair with the
second device;
• Then operate the first device to select "EDIFIER W330NB", and it
completes connecting two Bluetooth devices simultaneously.
Note:
When two smartphones have different operating systems (eg one has
Android™ and the other is iOS®), some cross-system operations (pause
songs in Android™ and play songs in iOS®) may experience delays.
Please be aware that this is normal.
4
Indicator
Red and blue
light flash
alternately