Troubleshooting - Connect IT CEP-9000-BK Benutzerhandbuch

BLUETOOTH EARPHONES
3. In the list of discoverable Bluetooth devices on the mobile phone, the headphone appears as CONNECT IT CEP-9000-BK
(CONNECT IT CEP-9000-WH).
EN 4. Click on the indication to pair the first headphone.
5. The pairing is indicated by the LED flashing in blue in longer intervals.
6. To switch on the other headphone, just press and hold the multifunction button for 2 seconds. The pairing will occur automatically.
7. The successful pairing of both headphones is indicated by the LEDs flashing in blue on both headphones.
Note: After the successful pairing of both headphones, they appear in the list of discoverable Bluetooth devices on the mobile phone as
a single line - CONNECT IT CEP-9000-BK (CONNECT IT CEP-9000-WH).
Headphones power-on
„ Press and hold the multifunction buttons on both headphones for 2 seconds to switch on, which is indicated by the red LED flashing.
„ The headphones automatically connect to the paired phone, if the phone has Bluetooth on and it is in range.
Headphones power-off
„ To switch off the headphones, press and hold the multifunction button on any of the headphones for 2 seconds. Both headphones
switch off simultaneously (it is not necessary to switch of each headphone).
Multifunction button
The multifunction button enables you to control some functions of the mobile phone:
To pause the playback
To resume the playback
Next track
To receive a call
To end a call
To reject a call
Note: The support for the functions in this manual depends on the paired phone.
5

Troubleshooting

Press the multifunction button once
Press the multifunction button once
Press the multifunction button twice
Press the multifunction button once
Press the multifunction button once
Press the multifunction button twice
CEP-9000-BK
CEP-9000-WH
USER MANUAL