Option Cycle; Zeitverzögerung (Time Delay); Wäsche Nachlegen (Add Item) - LG F11WM17VT2 Bedienungsanleitung

Option Cycle

Zeitverzögerung (Time Delay)
You can set a time delay so that the washing machine
will start automatically and finish after a specified time
interval.
1
Press the Ein/Aus button.
2
Select a washing programme.
3
Press the Zeitverzögerung button and set time
required.
4
Press the Start/Stopp button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running time
may vary due to water temperature, wash load
and other factors.
Turbo Wash™
Wash cycle in under 1 hour with energy and water
saving. (based on half of laundry)
1
Press the Ein/Aus button.
2
Select a washing programme.
3
Press the Turbo Wash™ button.
4
Press the Start/Stopp button.
NOTE
• Turbo Wash™ function of Some courses is
selected automatically.
26
Wäsche nachlegen (Add Item)
Use this function to add loads or remove the foreign
material.
1
Press the Wäsche nachlegen button.
2
Close the door after add loads or remove the
foreign material. (e.g. coin or pin etc.)
3
Press the Start/Stopp button.
• Results when choosing Wäsche nachlegen during
cycles.
- When the tub is spinning : Tub stops and Door Lock
is off.
- When water temperature in the tub is higher than
45°C : Wäsche nachlegen is not available with
short warning sound for safety.
- When lots of water is in the tub : Door Lock is off
after draining by safe water level.
NOTE
• Open the door when Door Lock is off after
checking the safety.
• Wäsche nachlegen doesn't work when Tub
Cleaning course is in progress for safety.
• Put the laundry into the tub completely. Laundry
caught in between door closing part can damage
door packing (rubber part) and might cause failure.