UK
4.
Using the shower
The Solar shower is equipped with a mixing valve, where the first cold water and then hot
water is flowing. The valve must not be over tightened, since this may be
damaged irreparable.
Connect the water hose to the shower and let the water warm up by the sun. (12 to 24
hours, depending on the ambient temperature and solar radiation).Once the water is hot,
open the valve until the desired temperature is reached.
To fill the solar tank, turn the valve to hot and wait until the shower is completely filled.
Once filled, close the valve and let the warm water warm up for several hours. When the
water drips furthermore with a closed mixer, ii is possible that the water pressure is too
high. Reduce this by fitting in a pressure regulator.
33
MV-1037-12-2019 . swim-fun.com © Alle rettigheder forbeholdes Swim & Fun Scandinavia ApS