Description; Mounting The Solar Shower - Swim & Fun Milano XL 35L Handbuch

UK
2.

Description

We recommend installation of the Outdoor Solar Shower to a solid surface to insure stabi-
lity and safety. When using tools, care must be taken not to damage chrome I plating. We
recommend using a cloth between wrench and shower parts to avoid damage.
3.

Mounting the solar shower

1. Choose a location for shower that receives the most direct sunlight.
2. Use the base plate/PVC tube to mark the position of the mounting holes to be drilled
into concrete/masonry for bolts.
3. Remove shower section. Drill 8 mm diameter holes, 50mm (1.77") deep, using the marks
just created.
4. Insert expansion nuts into drilled holes. Place the bolt inside the expansion nut and TAP
with a hammer to slightly expand the nut.
5. Remove bolt and place the base plate/lower tube over the holes and secure to surface
with bolts and washers provided. Poolen er designet som én enhed med integreret trap-
pe. Poolens vægstruktur består af i alt 12 lag. De første tre lag tilfører farven i et glitrende
30
MV-1037-12-2019 . swim-fun.com © Alle rettigheder forbeholdes Swim & Fun Scandinavia ApS