Parts List: Angled Housing Option; Installation: Angled Housing Option - Whale Twist DS0003B Handbuch

Fig. 3
STEP 3 Place the housing through the hole. Secure by hand tightening the lock nut
STEP 4 Feed the hose down through the housing
Please refer to section 8 for plumbing details.
10. PARTS LIST - ANGLED HOUSING OPTIONS
MIXER VERSION
1 Handset and hose with p clamp (screw incl.)
1 Angled housing (with 3 support rings supplied
2 Screw covers
1 Valve housing with temporary shut off valve
2 WX1532B - adaptor 1/2" BSP female
COLD ONLY VERSION
1 Handset and hose with p clamp (screw incl.)
1 Angled housing (with 3 support rings supplied
- black, red, and blue)
1 Screw covers
1 WX1532B - adaptor 1/2" BSP female
Downloaded from www.Manualslib.com
In Front of
the Bulkhead
onto the housing behind the bulkhead. (See Fig. 4a and 4b)
until the handset is in place. (See Fig. 5)
- black, red, and blue)
attached (includes 2 retaining screws)
(supplied with retail models only)
manuals search engine
Fig. 4a
In Front of
the Bulkhead
In Front
of the
Bulkhead
Fig. 6
Deck Protect
End cap
Handset
Fig. 4b
Behind
the Bulkhead
Fig. 5
TM
P Clamp
Angled
Housing
Hose
Screw
Covers
Valve
Housing
5